Leatherman Wave Survival Series: Knife, Serrated Knife, Saw, and File — Only Two Spines Can Actually Light a Ferro Rod—part 2

The Leatherman Wave is famous for being a do‑everything multitool, but most people never test its limits as a fire‑starter. I set out to answer a simple question with real survival value: which of the four major spines on the Wave can actually throw sparks from a ferrocerium rod? I tested the knife spine, serrated knife spine, saw spine, and file spine side‑by‑side to see which ones could ignite a ferro rod reliably.
 
The results were not what most people expect.
 
Why Test All Four Spines?
Many survival guides casually claim that “any 90‑degree spine” will work on a ferro rod. In reality, the geometry, tooth pattern, and steel edge profile matter far more than people think. The Wave gives you four very different spine designs, each with its own texture and angle:
• Knife spine
• Serrated knife spine
• Saw spine
• File spine
Only two of them produced sparks at all—and one of those outperformed everything else.
 
How the Test Was Done
To keep the test consistent, I used the same short ferrocerium rod for all four tools. The rod’s black coating was scraped off first to expose the raw metal underneath. Each tool was braced at the base of the rod with a firm 45‑degree cant, and instead of pushing the tool forward, I pulled the ferro rod toward me. This keeps the Wave stable and directs sparks exactly where you want them.
 
Knife Spine: No Sparks
The standard knife spine on the Wave is rounded and polished. It simply doesn’t have the sharp 90‑degree edge needed to bite into a ferro rod. No matter the angle or pressure, it produced zero sparks.
This is common with most folding knives unless they’re intentionally ground for fire‑starting.
 
Serrated Knife Spine: Also No Sparks
The serrated blade has a more aggressive look, but the spine is still smooth and rounded. Like the plain-edge knife, it failed to produce any sparks. The serrations themselves are useless for striking because they’re on the cutting edge, not the spine.
This makes the serrated blade a poor choice for ferro rod work.
 
File Spine: Strong Sparks and Reliable Ignition
The file was the first tool that actually worked—and it worked well. The teeth on the file’s spine create sharp micro‑edges that bite into the ferro rod and shave off hot metal. Once the angle was dialed in, the file threw consistent, bright sparks.
If you’ve ever wondered whether the file can double as a ferro rod striker, the answer is yes. It’s one of the two best options on the entire tool.
 
Saw Spine: Surprisingly the Best Ferro Rod Striker on the Wave
The biggest surprise of the test was the saw spine. Not only did it work, it performed as well as—or even better than—the file. The saw teeth are sharp, aggressive, and perfectly shaped to rip shavings off a ferro rod. The sparks were hotter, more numerous, and easier to direct.
In a real survival situation, the saw is the tool I would reach for first.
 
Final Ranking: Only Two Spines Can Start a Fire
After testing all four spines under the same conditions, the results were clear:
1. Saw spine — Best performer, hottest and most consistent sparks
2. File spine — Very good, reliable, strong sparks
3. Knife spine — No sparks
4. Serrated knife spine — No sparks
The Wave is a capable fire‑starter, but only if you know which tools to use.
 
Why This Matters for Real Survival Use
Many people assume their knife spine will work in an emergency, only to find out too late that it won’t. Knowing that the saw and file are the only two reliable ferro rod strikers on the Leatherman Wave gives you a real advantage when conditions are cold, wet, or windy.
It also means you can confidently build a fire even if you lose your dedicated striker or forget your fixed blade.
 
Ready to level up your self-reliance skills?
Master the Wild in Michigan: Learning from a screen is one thing, but getting out in the sunlight and getting some dirt time is another. Arcturus Primitive Skills Institute offers hands-on training in the heart of Michigan’s forests. From our Weekend Survival 101 and Plant workshops to specialized Knots and Fire classes, we provide the field-tested experience you need to stay capable when lost in the wild or when the grid goes down. We all know what’s coming, and the time to prepare is now.
 
Visit: survivalschoolmichigan.com to see our upcoming schedule and secure your spot in the next class.
 
Published on: March 15, 2026
 
Location: Arcturus Primitive Skills Institute
 
Notes: Please be aware that reproducing or copying content without permission is not acceptable. We expect everyone to refrain from this practice, as it can negatively affect your credibility and may raise legal concerns.

This Simple Trash Item Can Replace Your Ferro Rod Striker-Here’s the Proof

Why Glass Works as a Ferro Rod Striker
 
Ferrocerium ignites when a hard, sharp edge scrapes off tiny shavings of the rod at high speed. Those shavings combust instantly at temperatures that can exceed 3,000°F.
 
A shard of glass has three qualities that make it effective:
1. A razor‑sharp edge that bites into the ferro rod coating and exposes fresh metal.
2. A hard, brittle structure that maintains a crisp striking surface.
3. A natural 90‑degree angle along most broken edges, often sharper than a knife spine.
In many cases, glass actually produces more sparks than a multitool or a knife with a rounded spine.
 
Preparing the Ferro Rod for Maximum Sparks
A new ferro rod is coated in black lacquer to prevent corrosion. That coating must be removed before you’ll get consistent sparks.
1. Scrape the rod lightly with the glass edge until the coating is gone in one small section.
2. Expose bare metal along at least an inch of the rod.
3. Keep your tinder bundle ready before you begin striking.
Removing the coating is the difference between a weak drizzle of sparks and a full shower.
 
How to Hold the Glass Shard Safely
Glass is sharp, unpredictable, and unforgiving. Grip it with intention.
•Hold the shard with the dullest, thickest side toward your palm.
•Keep the sharp edge facing outward, away from your fingers.
•If possible, wrap part of the shard with cloth, bark, or a glove for stability.
•Choose a piece with at least one straight, clean edge.
The goal is control. A stable grip produces cleaner sparks and reduces the chance of cutting yourself.
 
The Technique: Striking a Ferro Rod With Glass
This is the same method you’d use with a knife spine, but the glass edge often bites deeper and throws hotter sparks.
1. Anchor the glass shard in your non‑dominant hand. Keep it still.
2. Place the ferro rod at the base of the glass edge, where the edge meets the thicker body of the shard.
3. Cant the glass at roughly a 45‑degree angle, leaning slightly away from you.
4. Pull the ferro rod toward you in a firm, controlled motion.
5. Watch for the bright spray of sparks as the glass shaves metal from the rod.
This method keeps the striker stationary and moves the rod instead, preventing you from knocking your tinder pile out of place.
 
Directing Sparks Into Your Tinder
A ferro rod is only as good as the tinder you feed it. Position your tinder bundle directly under the striking edge so the sparks fall into it naturally.
Good emergency tinder options include:
• Dry grass or cattail fluff
• Birch bark shavings
• Fatwood scrapings
• Cotton balls or dryer lint
• Feather sticks made from dead branches
Once the first ember catches, cup your hands around the bundle and blow gently until it grows into flame.
 
When Glass Outperforms a Knife
In field tests, glass often produces a hotter, denser spark shower than a multitool file or a knife spine. This happens because:
• The edge is sharper than most factory knife spines.
• The angle is naturally aggressive.
• The hardness of glass bites deeper into the ferro rod surface.
If you’re in a true emergency and your knife fails you, glass is not a compromise. It’s a legitimate fire‑starting tool.
 
Safety Considerations
Glass is effective, but it demands respect.
• Never strike toward your hand or leg.
• Avoid using thin, needle‑like shards that can snap under pressure.
• Keep the shard away from your face when scraping the rod.
• Dispose of the glass responsibly once you’re done.
A clean, controlled technique keeps the process safe and repeatable.
 
Why This Skill Matters in Real-World Survival
Improvised firecraft is one of the most valuable skills in the outdoors. Tools break. Gear gets lost. Conditions change. Knowing how to turn a discarded bottle into a fire‑starting tool gives you:
• A backup method when your knife fails
• A way to teach resourcefulness in survival classes
• A practical demonstration for bushcraft content
• A reliable technique in wet or cold conditions where fire is critical
This is the kind of skill that separates theory from capability.
 
Ready to level up your self-reliance skills?
 
Master the Wild in Michigan: Learning from a screen is one thing, but getting out in the sunlight and getting some dirt time is another. Arcturus Primitive Skills Institute offers hands-on training in the heart of Michigan’s forests. From our Weekend Survival 101 and Plant workshops to specialized Knots and Fire classes, we provide the field-tested experience you need to stay capable when lost in the wild or when the grid goes down. We all know what’s coming, and the time to prepare is now.
 
Visit: survivalschoolmichigan.com to see our upcoming schedule and secure your spot in the next class.
 
Published on: March 15, 2026
 
Location: Arcturus Primitive Skills Institute
 
Notes: Please be aware that reproducing or copying content without permission is not acceptable. We expect everyone to refrain from this practice, as it can negatively affect your credibility and may raise legal concerns.

Leatherman Wave Survival Series: Testing the Wave and a Glass Shard on a Ferrocerium Rod—part 1

Testing the Leatherman Wave vs. a Glass Shard for Ferro Rod Sparks
 
Most people assume you need a dedicated striker or a knife with a perfect 90‑degree spine to get reliable sparks from a ferrocerium rod. In practice, anything with a hard, crisp edge can work. To prove it, I tested two very different options: the file on a Leatherman Wave and a simple shard of glass.
 
The results were surprising, especially for anyone who relies on modern tools in the field.
 
Preparing the Ferro Rod: The Step Most People Skip
A brand‑new ferro rod comes coated in a black protective layer. That coating will not spark. Before testing either tool, I scraped the rod until the coating was gone and the bright metal underneath was exposed. This step is essential for consistent ignition, especially with short ferro rods that require more precise technique.
 
How the Leatherman Wave Performs as a Ferro Rod Striker
The Leatherman Wave has several edges that can work, but one stands out: the toothed spine of the file.
 
Why the File Spine Works Best
It has a crisp, squared edge that bites into the ferro rod.
The teeth add micro‑aggression to the scrape, shaving off more material.
It gives excellent control when braced against the rod’s base.
 
Technique That Produces Reliable Sparks
Expose the bare metal of the ferro rod.
Place the file spine at the base of the rod where it meets the handle.
Cant the file at roughly a forty‑five‑degree angle away from your body.
Hold the Wave steady and pull the ferro rod toward you.
This method sends sparks forward into your tinder bundle instead of toward your hand. The ignition comes from the hot metal shavings scraped off the rod, and the Wave’s file spine produces a strong, bright shower.
 
When You Don’t Have a Knife: Using a Shard of Glass
Losing your knife or carrying one without a proper 90‑degree spine doesn’t mean you’re out of options. Glass is one of the most overlooked emergency strikers in the field.
 
Why Glass Works So Well
The edge is extremely hard.
It naturally forms a sharp, square profile when broken.
It bites into ferro rods even more aggressively than many steel tools.
Using the exact same technique as with the Wave, the glass shard actually produced more sparks. The edge shaved off larger, hotter particles, creating a surprisingly intense spark shower.
This makes glass a legitimate backup striker—especially in environments where broken bottles, windows, or debris are common.
 
What This Test Reveals About Real‑World Firecraft
The biggest takeaway is simple: the tool matters far less than the edge geometry and your technique. A ferro rod will spark with almost anything hard and sharp enough to scrape metal from its surface.
 
Key insights from the test:
The Leatherman Wave’s file spine is a reliable, high‑control striker.
Glass is an underrated emergency option that can outperform steel.
Technique—angle, pressure, and rod movement—determines spark quality.
Short ferro rods require more precision but still perform well with the right edge.
This flexibility is exactly why ferro rods remain one of the most dependable fire‑starting tools in survival and bushcraft.
 
Ready to level up your self-reliance skills?
Master the Wild in Michigan: Learning from a screen is one thing, but getting out in the sunlight and getting some dirt time is another. Arcturus Primitive Skills Institute offers hands-on training in the heart of Michigan’s forests. From our Weekend Survival 101 and Plant workshops to specialized Knots and Fire classes, we provide the field-tested experience you need to stay capable when lost in the wild or when the grid goes down. We all know what’s coming, and the time to prepare is now.
 
Visit: survivalschoolmichigan.com to see our upcoming schedule and secure your spot in the next class.
 
Published on: March 11, 2026
 
Location: Arcturus Primitive Skills Institute
 
Notes: Please be aware that reproducing or copying content without permission is not acceptable. We expect everyone to refrain from this practice, as it can negatively affect your credibility and may raise legal concerns.

Master the Sheet Bend Knot: Essential Survival Skill for the Wild

In this video I show how to tie a Sheet Bend Knot, which is useful in connecting ropes or cordage of different thicknesses.